Nursing Homes and Care Homes: Fall Calls and the Family Call Chain
At two in the morning a resident presses the pendant in room fourteen. The night staff member is one person covering two floors, already dealing with a resident who cannot sleep. The phone rings on the desk in the lounge, she is on the other floor, and the family of the resident in room nine is expecting a call tonight about a blood test result the day staff forgot to chase.
One Night, Three Kinds of Call
A care home runs three call streams that happen to use the same telephone system. Resident calls need to reach a person quickly and raise an alarm when nobody can be found. Clinical and family calls are conversations with a specific individual and need privacy and a record. Administrative calls, from staff, suppliers, and contractors, need to be answered during office hours and nowhere else. When these three share one queue and one device, the worst outcome is a resident waiting while the office deals with a supplier.
The pendant and wall call points are the part most people expect to be technical. They are mostly simple, and the important decision is what happens after the call is answered. A resident who has pressed the pendant because they are uncomfortable, or confused, or need the toilet, needs a different response from a resident who has fallen. That distinction can be made at the call point, and it should be, because it decides whether the response is a walk down the corridor or a search of a bedroom with a risk assessment.
| Call type | Arrives as | Response |
|---|---|---|
| Pendant or wall point | Resident in a room | Prompt to the responsible nurse with a direct route |
| Fall or suspected fall | Pendant with fall indication | Escalation sequence with defined response times |
| Family call | Relative asking for an update | Staffed route during hours, messages outside |
| Clinical advice | GP, pharmacist, agency nurse | Direct route, quiet space, recorded where appropriate |
| Supplier and contractor | Deliveries, maintenance, agency | Recorded line, office hours only |
| Staff and agency onboarding | Before a shift starts | Separate process, not the resident line |
The Night Is the Real Test
The daytime call pattern is manageable. The night pattern is where a care home's communication design either works or does not, because staffing is thin and the calls that arrive are the ones residents cannot resolve themselves. A well-designed system has a small number of resident call points that ring one device held by the person on duty, with a clear escalation when it is not answered, and with the escalation reaching a second person rather than repeating at the same desk.
Two further things matter at night. A call point should identify the room without the carer having to look it up, and it should confirm to the resident that someone has heard them, because a pendant that rings into silence generates repeated pressing and residents who stop believing the system works. Both are ordinary configuration decisions with a large effect on how much residents rely on it.
Families Are a Separate and Underserved Audience
Relatives call constantly, and each call is short and emotionally loaded. They want to know whether a relative ate, slept, and seems well, and they often want to know why the GP rang. They are frequently frustrated by an office that is busy, and they are frequently the first people to notice a change in a resident. Two things follow. Family calls need a defined route with a realistic service expectation, and a message-taking arrangement that is honest about when someone will call back. The relative's information should also go to the person with responsibility for that resident, not to whoever picks up the desk phone.
- Give resident call points their own route, separate from office traffic
- Distinguish an urgent call from a request at the call point itself
- Confirm to the resident that the call was heard and answered
- Escalate unanswered resident calls to a second person, not the same desk
- Set a family call service expectation that the home can actually keep
- Route clinical calls to a quiet space and keep them off shared handsets
- Keep supplier and agency recruitment calls out of the resident queues
Handover Is Where the Record Matters
Care homes run shift handovers in person, and they are thorough, which is a strength. The phone system's contribution is what happens between handovers: an incident at two in the morning needs to be visible to the day team, and the family conversation that follows needs to recall what was observed rather than what was written down once and passed along three times. Where calls are recorded on the line that took them, the day team can review the actual conversation, which is often the fastest way to settle a complaint from a relative.
The other handover point is agency staff. A large proportion of care staff are agency or new, they change often, and they need access to the system on their first shift. A system where the call point identifies the room and the escalation works without training is worth a great deal here. Where recording is used on resident and family lines, the privacy position is clear and should be explained to residents and relatives rather than assumed to be acceptable.
Redstone Approach
Redstone platforms support dedicated destinations for resident call points that bypass office queues, escalation groups with defined timeouts for unanswered calls, time-based routing so the number behaves differently during the day and at night, and separate routes for family, clinical, and supplier traffic. Recording can be enabled per line so resident and family conversations are governed separately from general office calls, and NewLync 2.0 unified communication lets staff on mobile handsets take a resident call from elsewhere in the building.
Redstone Systems, Inc. founded in Delaware, USA in December 2002, has been the ODM vendor for many well-known communications companies, serving the Southeast Asian market. In 2020, Redstone Systems will begin to return to the North America market with its self-developed brand.
Redstone has a complete product line of intelligent voice gateways, providing IP-PBXs, analog VoIP gateways (FXS/FXO), digital VoIP gateways (E1/T1), border appliances, and session boundary controllers (SBCs).
With advanced technology in digital signal processor (DSP), speech coding and speech processing, as well as efficient operational tools such as cloud remote management, auto provisioning, Redstone gateways are widely used in markets of enterprise communications, cloud communications, call centers, operators’ IMS/SIP trunks, bringing users friendly, efficient and reliable communication experience.
For more information about Redstone, You can follow us on Facebook, Linkedin, and Youtube to be the first to get the latest news.

Current Location :

